WT100x26
Section Property Table for WT100x26
| W: Thickness of web, mm. | B: Width of flange , mm. | D: Deppth of section, mm | T: Thickness of flange, mm. |
| W: 7.9 | B: 204 | D:103 | T: 12.6 |
| BT: Width-to-thickness ratio . | HW: Depth-to-thickness ratio of web. | K: Distance between outer face of flange and web-toe of fillet, mm. | K1: Distance between middle line of web and flange-toe of fillet, mm. |
| BT: 8.1 | HW: 11.4 | K: 29 | K1: 19 |
| Dn_i: Nominal depth of section (Imperial units), in. | Dnom: Nominal depth of section, mm. | Mass: Mass per length, kg/m. | Wt_i: Weight per length (Imperial units), lb/ft. |
| Dn_i: 4 | Dnom: 100 | Mass: 26 | Wt_i: 17.5 |
| A: (Cross-sectional area, mm^2) | J: St-Venant torsional constant, mm^4. | Cw: Warping constant, mm^6. | Sw: Warping statical moment, mm^4. |
| A: 3330 | J: 161 | Cw: 0.13 | Sw: |
| Ix: Moment of inertia about axis XX, mm^4. | Sx: Elastic section modulus about axis XX, mm^3. | Rx: Radius of gyration about axis XX, mm. | Sw: Plastic modulus about axis XX, mm^3. |
| Ix: 2 | Sx: 23.4 | Rx: 24.5 | Zx: |
| Iy: Moment of inertia about axis YY, mm^4. | Sy: Elastic section modulus about axis YY, mm^3. | Ry: Radius of gyration about axis YY, mm. | Zy: Plastic modulus about axis YY, mm^3. |
| Iy: 8.92 | Sy: 87.4 | Ry: 51.8 | Zy: |
| Qf: Statical moment at point in flange in line with web face, mm^3. | Qw: Statical moment at mid-depth in web, mm^3. | SA: Surface area per metre, m. | Section: Structural Member |
| Qf: | Qw: | SA: 0.614 | Section: WT100x26 |
Amazon Auto Links: No products found.
Amazon Auto Links: No products found.