W: Thickness of web, mm. |
B: Width of flange , mm. |
D: Deppth of section, mm |
T: Thickness of flange, mm. |
W: 8 |
B: 127 |
D:127 |
T: 10.6 |
BT: Width-to-thickness ratio . |
HW: Depth-to-thickness ratio of web. |
K: Distance between outer face of flange and web-toe of fillet, mm. |
K1: Distance between middle line of web and flange-toe of fillet, mm. |
BT: 5.99 |
HW: 12.7 |
K: 22 |
K1: 13 |
Dn_i: Nominal depth of section (Imperial units), in. |
Dnom: Nominal depth of section, mm. |
Mass: Mass per length, kg/m. |
Wt_i: Weight per length (Imperial units), lb/ft. |
Dn_i: 5 |
Dnom: 130 |
Mass: 28.1 |
Wt_i: 18.9 |
A: (Cross-sectional area, mm^2) |
J: St-Venant torsional constant, mm^4. |
Cw: Warping constant, mm^6. |
Sw: Warping statical moment, mm^4. |
A: 3580 |
J: 142 |
Cw: 11.1 |
Sw: |
Ix: Moment of inertia about axis XX, mm^4. |
Sx: Elastic section modulus about axis XX, mm^3. |
Rx: Radius of gyration about axis XX, mm. |
Sw: Plastic modulus about axis XX, mm^3. |
Ix: 10 |
Sx: 158 |
Rx: 52.9 |
Zx: 181 |
Iy: Moment of inertia about axis YY, mm^4. |
Sy: Elastic section modulus about axis YY, mm^3. |
Ry: Radius of gyration about axis YY, mm. |
Zy: Plastic modulus about axis YY, mm^3. |
Iy: 3.29 |
Sy: 51.8 |
Ry: 30.3 |
Zy: 82.3 |
Qf: Statical moment at point in flange in line with web face, mm^3. |
Qw: Statical moment at mid-depth in web, mm^3. |
SA: Surface area per metre, m. |
Section: Structural Member |
Qf: |
Qw: |
SA: 0.746 |
Section: M130x28.1 |