W250X32.7
| Type | W | |
|---|---|---|
| AISC Manual Label | W250X32.7 | |
| W | W – Nominal weight, (kg/m) | 32.7 |
| A | A – Cross-sectional area,(mm2) | 4190 |
| d | d – Overall depth of member, (mm) | 259 |
| ddet | ddet – Detailing value of member depth,(mm) | 257 |
| Ht | Ht – Overall depth of square or rectangular HSS, (mm) | |
| h | h – Depth of the flat wall of square or rectangular HSS,(mm) | |
| OD | OD – Outside diameter of round HSS or pipe, in. (mm) | |
| bf | bf – Flange width, in. (mm) | 146 |
| bfdet | bfdet – Detailing value of flange width, in. (mm) | 146 |
| B | B – Overall width of square or rectangular HSS, in. (mm) | |
| b | b – Width , in. (mm) | |
| ID | ID – Inside diameter of round HSS or pipe, in. (mm) | |
| tw | tw – Web thickness, in. (mm) | 6.1 |
| twdet | twdet – Detailing value of web thickness, in. (mm) | 6.35 |
| twdet/2 | twdet/2 – Detailing value of tw/2, in. (mm) | 3.18 |
| tf | tf – Flange thickness, in. (mm) | 9.14 |
| tfdet | tfdet – Detailing value of flange thickness, in. (mm) | 9.52 |
| t | t – Thickness of angle leg, in. (mm) | |
| tnom | tnom – HSS and pipe nominal wall thickness, (mm) | |
| tdes | tdes – HSS and pipe design wall thickness, (mm) | |
| kdes | kdes – Design distance from outer face of flange to web toe of fillet, (mm) | 16.8 |
| kdet | kdet – Detailing distance from outer face of flange to web toe of fillet, (mm) | 23.8 |
| k1 | k1 – Detailing distance from center of web to flange toe of fillet, (mm) | 15.9 |
| x | x – Horizontal distance from designated member edge, (mm) | |
| y | y – Vertical distance from designated member edge, (mm) | |
| eo | eo – Horizontal distance from designated member edge, (mm) | |
| xp | xp – Horizontal distance from designated member edge, (mm) | |
| yp | yp – Vertical distance from designated member edge, (mm) | |
| bf/2tf | bf/2tf – Slenderness ratio | 7.99 |
| b/t | b/t – Slenderness ratio for single angles | |
| b/tdes | b/tdes – Slenderness ratio for square or rectangular HSS | |
| h/tw | h/tw – Slenderness ratio | 36.9 |
| h/tdes | h/tdes – Slenderness ratio for square or reHangular HSS | |
| D/t | D/t – Slenderness ratio for round HSS and pipe, or tee shapes | |
| Ix / 106 | Ix – Moment of inertia about the x-axis, (mm4 /10^6) | 49.1 |
| Zx / 103 | Zx – Pltic section modulus about the x-axis, (mm3 /10^3) | 426 |
| Sx / 103 | Sx – Eltic section modulus about the x-axis, (mm3 /10^3) | 380 |
| rx | rx – Radius of gyration about the x-axis, (mm) | 108 |
| Iy / 106 | Iy – Moment of inertia about the y-axis, (mm4 /10^6) | 4.75 |
| Zy / 103 | Zy – Pltic section modulus about the y-axis, (mm3 /10^3) | 100 |
| Sy / 103 | Sy – Eltic section modulus about the y-axis, (mm3 /10^3) | 265.1 |
| ry | ry – Radius of gyration about the y-axis (with no separation for double angles back-to-back), (mm) | 33.8 |
| Iz / 106 | Iz – Moment of inertia about the z-axis, (mm3 /10^6) | |
| rz | rz – Radius of gyration about the z-axis, (mm) | |
| Sz / 103 | Sz – Eltic section modulus about the z-axis, (mm3 /10^3) | |
| J / 103 | J – Torsional moment of inertia, (mm4 /10^3) | 99.5 |
| Cw / 109 | Cw – Warping constant, (mm6 /10^9) | 73.8 |
| C / 103 | C – HSS torsional constant, (mm3 /10^3) | |
| Wno | Wno – Normalized warping function, used in Design Guide 9, (mm2) | 9100 |
| Sw1 / 106 | Sw1 – Warping statical moment at point 1 on cross section, (mm4 /10^6) | 3.05 |
| Sw2 / 106 | Sw2 – Warping statical moment at point 2 on cross section, (mm4 /10^6) | |
| Sw3 / 106 | Sw3 – Warping statical moment at point 3 on cross section, (mm4 /10^6) | |
| Qf / 103 | Qf – Statical moment for a point in the flange directly above the vertical edge of the web, (mm3 /10^3) | 80 |
| Qw / 103 | Qw – Statical moment for a point at mid-depth of the cross section, (mm3 /10^3) | 211 |
| ro | ro – Polar radius of gyration about the shear center, (mm) | |
| H | H – Flexural constant | |
| tan(?) | tan(a) – Tangent of the angle between the y-y and z-z axes for single angles | |
| Qs | Qs – Reduction factor for slender unstiffened compression elements | |
| Iw / 106 | Iw – Moment of inertia about the w-axis, (mm4 /10^6) | |
| zA | zA – Distance from point A to center of gravity along z-axis, | |
| zB | zB – Distance from point B to center of gravity along z-axis, | |
| zC | zC – Distance from point C to center of gravity along z-axis, | |
| wA | wA – Distance from point A to center of gravity along w-axis, | |
| wB | wB – Distance from point B to center of gravity along w-axis, | |
| wC | wC – Distance from point C to center of gravity along w-axis, | |
| SwA / 103 | SwA – Eltic section modulus about the w-axis at point A on cross section, | |
| SwB / 103 | SwB – Eltic section modulus about the w-axis at point B on cross section, | |
| SwC / 103 | SwC – Eltic section modulus about the w-axis at point C on cross section, | |
| SzA / 103 | SzA – Eltic section modulus about the z-axis at point A on cross section, | |
| SzB / 103 | SzB – Eltic section modulus about the z-axis at point B on cross section, | |
| SzC / 103 | SzC – Eltic section modulus about the z-axis at point C on cross section, | |
| rts | rts – Effective radius of gyration, (mm) | 39.4 |
| ho | ho – Distance between the flange centroids, (mm) | 250 |
| PA | PA – Shape perimeter minus one flange surface, used in Design Guide 19, (mm) | 930 |
| PB | PB – Shape perimeter, used in Design Guide 19, (mm) | 1080 |
Amazon Auto Links: No products found.
Makita MAC210Q Quiet Series, 1 HP, 2 Gallon, Oil-Free, Electric Air Compressor
(279)Quiet Series design at only 60 dB for operator and crew comfort; ideal for indoor useRuns at a lower RPM (1, 750) resulting in longer motor and pump lifeComplete roll-cage construction provides protection to withstand a variety of job-site, transport... read more
(as of March 3, 2021 - More infoProduct prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.)
Air Pump for Inflatables, Cordless Electric Air Mattress Pump for Pool Floats, Swimming Rings, Rechargeable Battery Powered with Car Adapter-Black
(178)Palm size body with inbuilt rechargeable battery makes one hand operation to inflate swimming rings, pool floats, air mattress at the beach possible6000mAh batteries enables long-lasting power supply for 30 minutes continuous use without over-heat pr... read more
(as of March 3, 2021 - More infoProduct prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.)
Trek S Battery Operated Piston Compressor with AC and DC Adapters (Battery Not Included)
(550)
Sun Joe 24V-AJC-LTE 24V 2.0-Amp Cordless Portable Air Compressor
(183)24 Volt rechargeable air compressorFeaturing exclusive EcoSharp technology for no fade power and maximum performanceDigital LED control for precise pressureAuto shut-off at preset pressureIncludes nozzles pin attachments
(as of March 3, 2021 - More infoProduct prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.)
DEWALT Air Compressor, 135-PSI Max, 1 Gallon (D55140)
(696)Heavy-duty 1-gallon trim compressor with protective roll cage135 psi maximum, durable oil-free pump, low 71 dB rating, low 2.6 amp motorIncludes 1 compressor; hose & nailer not included9-inches wide; 24 pounds; 1-year warranty
(as of March 3, 2021 - More infoProduct prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.)
BOSTITCH Air Compressor Combo Kit, 2-Tool (BTFP2KIT)
(336)BTFP02012 6 gallon 150PSI 2.6SCFM pancake compressor with a high efficiency motorSB 1850BN 18 GA Brad nailer drives 18GA brad nails from 5/8 inches to 2 inches for a wide variety of applicationsSB 1664FN 16 GA Straight Finish nailer drives 1 1/4 to 2... read more
(as of March 3, 2021 - More infoProduct prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.)
California Air Tools 2010A Ultra Quiet and Oil-Free 1.0 HP 2.0-Gallon Aluminum Tank Air Compressor,Silver
(676)Ultra Quiet only 60 DecibelsOil-Free Pump for Less Maintenance & Costs2.0 Gallon (Rust Free) Aluminum TankPowerful 1.0 HP (Rated / Running) 2.0 HP (Peak) Motor3.10 CFM at 40 PSI 2.20 CFM at 90 PSI Ultra Quiet only 60 DecibelsOil-Free Pump for Le... read more
(as of March 3, 2021 - More infoProduct prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.)
![Ryobi Portable Power Inflator for Tires [NEW DIGITAL GAUGE] [18-Volt] [Cordless] [ONE+ Battery system] [P737D] (Battery Not Included, Power Tool Only) #1](https://m.media-amazon.com/images/I/414K5jq-nUL._SL100_.jpg)
![Ryobi Portable Power Inflator for Tires [NEW DIGITAL GAUGE] [18-Volt] [Cordless] [ONE+ Battery system] [P737D] (Battery Not Included, Power Tool Only) #2](https://m.media-amazon.com/images/I/41uNIoxJkNL._SL100_.jpg)
![Ryobi Portable Power Inflator for Tires [NEW DIGITAL GAUGE] [18-Volt] [Cordless] [ONE+ Battery system] [P737D] (Battery Not Included, Power Tool Only) #3](https://m.media-amazon.com/images/I/41fBcBJblcL._SL100_.jpg)
![Ryobi Portable Power Inflator for Tires [NEW DIGITAL GAUGE] [18-Volt] [Cordless] [ONE+ Battery system] [P737D] (Battery Not Included, Power Tool Only) #4](https://m.media-amazon.com/images/I/31CXwTzG-DL._SL100_.jpg)
![Ryobi Portable Power Inflator for Tires [NEW DIGITAL GAUGE] [18-Volt] [Cordless] [ONE+ Battery system] [P737D] (Battery Not Included, Power Tool Only) #5](https://m.media-amazon.com/images/I/519d-Pp8qVL._SL100_.jpg)
Ryobi Portable Power Inflator for Tires [NEW DIGITAL GAUGE] [18-Volt] [Cordless] [ONE+ Battery system] [P737D] (Battery Not Included, Power Tool Only)
(1749)NEW AND IMPROVED!ONE+ COMPATIBLE! This tool runs on the power sources used in Ryobi’s ONE+ battery system, making this purchase extra smart for the Ryobi veteranPORTABLE PISTOL PUMPING POWER: Ryobi’s P737D is smaller than most inflators, boasting an ... read more
(as of March 3, 2021 - More infoProduct prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.)
AstroAI Portable Air Compressor Pump, Digital Tire Inflator 12V DC Electric Gauge with Larger Air Flow 35L/Min, LED Light, Overheat Protection, Extra Nozzle Adaptors and Fuse, Blue
(5901)INCREASED SAFETY: Properly inflated tires provide better performance in all weather conditions; prevent crashes, tire explosions, and premature tire wear; INTEGRATED IN-LINE FUSE prevents overloading the air compressor, making it safer for everyone t... read more
(as of March 3, 2021 - More infoProduct prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.)
DEWALT Pancake Air Compressor, 6 Gallon, 165 PSI (DWFP55126)
(2509)165 max PSI 6.0 gallon tank (22.7 L) and 2.6 SCFM delivered at 90 PSI pump. SCFM @ 40 PSI 3.7 SCFMHigh efficiency motor for easy start up in cold weather or extension cord application. [14 ga or larger, 50 feet. (15.2 m) or less]75.5 dBA noise level ... read more
(as of March 3, 2021 - More infoProduct prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.)