Polyphenylene Sulfide Molded

Material Properties for Polyphenylene Sulfide Molded

Physical specifications of materials.

Materials Polyphenylene Sulfide Molded
  Description
Density g/cc 1.57
  lb/in^3 0.0567
Hardness Brinell unless specified 90(Rockwell-M)
Tensile Strength ultimate Mpa 95
  Ksi 13.775
Yield Strength MPa 6809
  Ksi 987.305
Modulus of Elasticity Gpa 3.5
  10^6 Psi 0.507246376
Poisson’s Ratio  
%Elongation at break 3
%Reduction of area
Izod Impact J 1.25
  Ft-lb 0.92225
Fracture Toughness Mpa(m)^0.5
  Ksi(in)^0.5
Thermal conductivity W/m-K 0.31
  Btu/ft-h-F 0.17919075142
Specific Heat Cpacity J/g-K
  Btu/lb-F 0
Coefficient of thermal expansion 1E-6/K 32
  1E-6/F 17.804511264
Electrical Resistivity Ohm-cm 1000000000000000