HSS228.6X76.2X12.7
| Type | HSS | |
|---|---|---|
| AISC Manual Label | HSS228.6X76.2X12.7 | |
| W | W – Nominal weight, (kg/m) | 52.2 |
| A | A – Cross-sectional area,(mm2) | 6280 |
| d | d – Overall depth of member, (mm) | |
| ddet | ddet – Detailing value of member depth,(mm) | |
| Ht | Ht – Overall depth of square or rectangular HSS, (mm) | 229 |
| h | h – Depth of the flat wall of square or rectangular HSS,(mm) | 193 |
| OD | OD – Outside diameter of round HSS or pipe, in. (mm) | |
| bf | bf – Flange width, in. (mm) | |
| bfdet | bfdet – Detailing value of flange width, in. (mm) | |
| B | B – Overall width of square or rectangular HSS, in. (mm) | 76.2 |
| b | b – Width , in. (mm) | 40.6 |
| ID | ID – Inside diameter of round HSS or pipe, in. (mm) | |
| tw | tw – Web thickness, in. (mm) | |
| twdet | twdet – Detailing value of web thickness, in. (mm) | |
| twdet/2 | twdet/2 – Detailing value of tw/2, in. (mm) | |
| tf | tf – Flange thickness, in. (mm) | |
| tfdet | tfdet – Detailing value of flange thickness, in. (mm) | |
| t | t – Thickness of angle leg, in. (mm) | |
| tnom | tnom – HSS and pipe nominal wall thickness, (mm) | 12.7 |
| tdes | tdes – HSS and pipe design wall thickness, (mm) | 11.8 |
| kdes | kdes – Design distance from outer face of flange to web toe of fillet, (mm) | |
| kdet | kdet – Detailing distance from outer face of flange to web toe of fillet, (mm) | |
| k1 | k1 – Detailing distance from center of web to flange toe of fillet, (mm) | |
| x | x – Horizontal distance from designated member edge, (mm) | |
| y | y – Vertical distance from designated member edge, (mm) | |
| eo | eo – Horizontal distance from designated member edge, (mm) | |
| xp | xp – Horizontal distance from designated member edge, (mm) | |
| yp | yp – Vertical distance from designated member edge, (mm) | |
| bf/2tf | bf/2tf – Slenderness ratio | |
| b/t | b/t – Slenderness ratio for single angles | |
| b/tdes | b/tdes – Slenderness ratio for square or rectangular HSS | 3.44 |
| h/tw | h/tw – Slenderness ratio | |
| h/tdes | h/tdes – Slenderness ratio for square or reHangular HSS | 16.3 |
| D/t | D/t – Slenderness ratio for round HSS and pipe, or tee shapes | |
| Ix / 106 | Ix – Moment of inertia about the x-axis, (mm4 /10^6) | 33.6 |
| Zx / 103 | Zx – Pltic section modulus about the x-axis, (mm3 /10^3) | 403 |
| Sx / 103 | Sx – Eltic section modulus about the x-axis, (mm3 /10^3) | 295 |
| rx | rx – Radius of gyration about the x-axis, (mm) | 73.2 |
| Iy / 106 | Iy – Moment of inertia about the y-axis, (mm4 /10^6) | 5.49 |
| Zy / 103 | Zy – Pltic section modulus about the y-axis, (mm3 /10^3) | 177 |
| Sy / 103 | Sy – Eltic section modulus about the y-axis, (mm3 /10^3) | 2144 |
| ry | ry – Radius of gyration about the y-axis (with no separation for double angles back-to-back), (mm) | 29.7 |
| Iz / 106 | Iz – Moment of inertia about the z-axis, (mm3 /10^6) | |
| rz | rz – Radius of gyration about the z-axis, (mm) | |
| Sz / 103 | Sz – Eltic section modulus about the z-axis, (mm3 /10^3) | |
| J / 103 | J – Torsional moment of inertia, (mm4 /10^3) | 16600 |
| Cw / 109 | Cw – Warping constant, (mm6 /10^9) | |
| C / 103 | C – HSS torsional constant, (mm3 /10^3) | 323 |
| Wno | Wno – Normalized warping function, used in Design Guide 9, (mm2) | |
| Sw1 / 106 | Sw1 – Warping statical moment at point 1 on cross section, (mm4 /10^6) | |
| Sw2 / 106 | Sw2 – Warping statical moment at point 2 on cross section, (mm4 /10^6) | |
| Sw3 / 106 | Sw3 – Warping statical moment at point 3 on cross section, (mm4 /10^6) | |
| Qf / 103 | Qf – Statical moment for a point in the flange directly above the vertical edge of the web, (mm3 /10^3) | |
| Qw / 103 | Qw – Statical moment for a point at mid-depth of the cross section, (mm3 /10^3) | |
| ro | ro – Polar radius of gyration about the shear center, (mm) | |
| H | H – Flexural constant | |
| tan(?) | tan(a) – Tangent of the angle between the y-y and z-z axes for single angles | |
| Qs | Qs – Reduction factor for slender unstiffened compression elements | |
| Iw / 106 | Iw – Moment of inertia about the w-axis, (mm4 /10^6) | |
| zA | zA – Distance from point A to center of gravity along z-axis, | |
| zB | zB – Distance from point B to center of gravity along z-axis, | |
| zC | zC – Distance from point C to center of gravity along z-axis, | |
| wA | wA – Distance from point A to center of gravity along w-axis, | |
| wB | wB – Distance from point B to center of gravity along w-axis, | |
| wC | wC – Distance from point C to center of gravity along w-axis, | |
| SwA / 103 | SwA – Eltic section modulus about the w-axis at point A on cross section, | |
| SwB / 103 | SwB – Eltic section modulus about the w-axis at point B on cross section, | |
| SwC / 103 | SwC – Eltic section modulus about the w-axis at point C on cross section, | |
| SzA / 103 | SzA – Eltic section modulus about the z-axis at point A on cross section, | |
| SzB / 103 | SzB – Eltic section modulus about the z-axis at point B on cross section, | |
| SzC / 103 | SzC – Eltic section modulus about the z-axis at point C on cross section, | |
| rts | rts – Effective radius of gyration, (mm) | |
| ho | ho – Distance between the flange centroids, (mm) | |
| PA | PA – Shape perimeter minus one flange surface, used in Design Guide 19, (mm) | |
| PB | PB – Shape perimeter, used in Design Guide 19, (mm) | |
Amazon Auto Links: No products found.
Uniclife Compact Compressor Machine with Full Accessories for Kids and Elderly
(66)One-button easy operation system, designed for all ages using.Measures 12" x 7" x 4" and weighs only 4.6 lbs. Built-in handle for travel or household use.Two built-in storage compartments for organizing power cord and all accessories neatly.Four non-... read more
(as of March 8, 2021 - More infoProduct prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.)
C P CHANTPOWER Tire Inflator Air Compressor,12V DC Portable Car Tire Pump with Auto Shut Off, Bright LED Light for Car Tires Bike Tires and Other Inflatables
(13)Strong Motor & Fast Inflation --- Upgraded strong mental cylinder motor provides for faster tire inflation, go from flat to full in just a few minutes! Support pressure up to 120 PSI, provides fast inflation speed at 1.23 CFM.LCD Display Screen & Aut... read more
(as of March 8, 2021 - More infoProduct prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.)
Senco PC1010 1-Horsepower Peak, 1/2 hp running 1-Gallon Compressor,Gray/Red
(1137)Lightweight and portable--easy to carry from site to site as you workOne horsepower peak ,1/2 horsepower runningand one-gallon capacityIdeal for a range of renovation and home improvement jobs, as well as for hobbies and craftsDelivers 20 to 44 drive... read more
(as of March 8, 2021 - More infoProduct prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.)
DEWALT Pancake Air Compressor, 6 Gallon, 165 PSI (DWFP55126)
(2524)165 max PSI 6.0 gallon tank (22.7 L) and 2.6 SCFM delivered at 90 PSI pump. SCFM @ 40 PSI 3.7 SCFMHigh efficiency motor for easy start up in cold weather or extension cord application. [14 ga or larger, 50 feet. (15.2 m) or less]75.5 dBA noise level ... read more
(as of March 8, 2021 - More infoProduct prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.)
Trek S Battery Operated Piston Compressor with AC and DC Adapters (Battery Not Included)
(555)
California Air Tools 2010A Ultra Quiet and Oil-Free 1.0 HP 2.0-Gallon Aluminum Tank Air Compressor,Silver
(681)Ultra Quiet only 60 DecibelsOil-Free Pump for Less Maintenance & Costs2.0 Gallon (Rust Free) Aluminum TankPowerful 1.0 HP (Rated / Running) 2.0 HP (Peak) Motor3.10 CFM at 40 PSI 2.20 CFM at 90 PSI Ultra Quiet only 60 DecibelsOil-Free Pump for Le... read more
(as of March 8, 2021 - More infoProduct prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.)
California Air Tools 8010A Aluminum Tank Air Compressor | Ultra Quiet, Oil-Free, 1.0 hp, 8 gal
(1577)Comes complete with Wheel Kit & Air Filter | No hose included | Consider you will need a ¼” Universal / Industrial Male Quick Connector to attach your hose to the air compressorProduct dimensions – 26" L x 14" W x 23” H | Max Pressure – 120 PSI | Vol... read more
(as of March 8, 2021 - More infoProduct prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.)
Personal Compressor Nebuliser Portable Compressor System with Tubing Kits for Home Use
(194)Instant Relief for - Most of respiratory symptoms, such as cold, congestion, etc.Solid & Durable - Made of high quality PP material, durable and last long time.Operate Steady - It operates steady and can use continuously.Easy & Convenient - Simple to... read more
(as of March 8, 2021 - More infoProduct prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.)
PORTER-CABLE Air Compressor, 6-Gallon, Pancake, Oil-Free (C2002)
(3597)150 psi max tank pressure stores more air in the tank for longer tool run times2.6 SCFM at 90 psi allows for quick compressor recovery time, per ISO1217Six-gallon pancake-style tank for stability, includes water drain valve and rubber feetLow-amp 120... read more
(as of March 8, 2021 - More infoProduct prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.)
Ryobi 18-Volt ONE+ Dual Function Inflator/Deflator (Tool Only) P747 (Bulk Packaged, Non-Retail Packaging)
(717)High volume inflation/deflation for large inflatables like air mattresses and pool toysEasy view precision digital gauge for easy, accurate, pressure readingsCordless for convenient use in virtually any location, Includes: Hoses, Nozzles, Sports Need... read more
(as of March 8, 2021 - More infoProduct prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.)