2L102X89X7.9LLBB
| Type | 2L | |
|---|---|---|
| AISC Manual Label | 2L102X89X7.9LLBB | |
| W | W – Nominal weight, (kg/m) | 22.8 |
| A | A – Cross-sectional area,(mm2) | 2900 |
| d | d – Overall depth of member, (mm) | 88.9 |
| ddet | ddet – Detailing value of member depth,(mm) | |
| Ht | Ht – Overall depth of square or rectangular HSS, (mm) | |
| h | h – Depth of the flat wall of square or rectangular HSS,(mm) | |
| OD | OD – Outside diameter of round HSS or pipe, in. (mm) | |
| bf | bf – Flange width, in. (mm) | |
| bfdet | bfdet – Detailing value of flange width, in. (mm) | |
| B | B – Overall width of square or rectangular HSS, in. (mm) | |
| b | b – Width , in. (mm) | 102 |
| ID | ID – Inside diameter of round HSS or pipe, in. (mm) | |
| tw | tw – Web thickness, in. (mm) | |
| twdet | twdet – Detailing value of web thickness, in. (mm) | |
| twdet/2 | twdet/2 – Detailing value of tw/2, in. (mm) | |
| tf | tf – Flange thickness, in. (mm) | |
| tfdet | tfdet – Detailing value of flange thickness, in. (mm) | |
| t | t – Thickness of angle leg, in. (mm) | 7.94 |
| tnom | tnom – HSS and pipe nominal wall thickness, (mm) | |
| tdes | tdes – HSS and pipe design wall thickness, (mm) | |
| kdes | kdes – Design distance from outer face of flange to web toe of fillet, (mm) | |
| kdet | kdet – Detailing distance from outer face of flange to web toe of fillet, (mm) | |
| k1 | k1 – Detailing distance from center of web to flange toe of fillet, (mm) | |
| x | x – Horizontal distance from designated member edge, (mm) | |
| y | y – Vertical distance from designated member edge, (mm) | 29.7 |
| eo | eo – Horizontal distance from designated member edge, (mm) | |
| xp | xp – Horizontal distance from designated member edge, (mm) | |
| yp | yp – Vertical distance from designated member edge, (mm) | 10.2 |
| bf/2tf | bf/2tf – Slenderness ratio | |
| b/t | b/t – Slenderness ratio for single angles | 12.8 |
| b/tdes | b/tdes – Slenderness ratio for square or rectangular HSS | |
| h/tw | h/tw – Slenderness ratio | |
| h/tdes | h/tdes – Slenderness ratio for square or reHangular HSS | |
| D/t | D/t – Slenderness ratio for round HSS and pipe, or tee shapes | |
| Ix / 106 | Ix – Moment of inertia about the x-axis, (mm4 /10^6) | 2.94 |
| Zx / 103 | Zx – Pltic section modulus about the x-axis, (mm3 /10^3) | 73.4 |
| Sx / 103 | Sx – Eltic section modulus about the x-axis, (mm3 /10^3) | 41 |
| rx | rx – Radius of gyration about the x-axis, (mm) | 31.8 |
| Iy / 106 | Iy – Moment of inertia about the y-axis, (mm4 /10^6) | 3.67 |
| Zy / 103 | Zy – Pltic section modulus about the y-axis, (mm3 /10^3) | 78.3 |
| Sy / 103 | Sy – Eltic section modulus about the y-axis, (mm3 /10^3) | 241.3 |
| ry | ry – Radius of gyration about the y-axis (with no separation for double angles back-to-back), (mm) | 35.6 |
| Iz / 106 | Iz – Moment of inertia about the z-axis, (mm3 /10^6) | |
| rz | rz – Radius of gyration about the z-axis, (mm) | |
| Sz / 103 | Sz – Eltic section modulus about the z-axis, (mm3 /10^3) | |
| J / 103 | J – Torsional moment of inertia, (mm4 /10^3) | |
| Cw / 109 | Cw – Warping constant, (mm6 /10^9) | |
| C / 103 | C – HSS torsional constant, (mm3 /10^3) | |
| Wno | Wno – Normalized warping function, used in Design Guide 9, (mm2) | |
| Sw1 / 106 | Sw1 – Warping statical moment at point 1 on cross section, (mm4 /10^6) | |
| Sw2 / 106 | Sw2 – Warping statical moment at point 2 on cross section, (mm4 /10^6) | |
| Sw3 / 106 | Sw3 – Warping statical moment at point 3 on cross section, (mm4 /10^6) | |
| Qf / 103 | Qf – Statical moment for a point in the flange directly above the vertical edge of the web, (mm3 /10^3) | |
| Qw / 103 | Qw – Statical moment for a point at mid-depth of the cross section, (mm3 /10^3) | |
| ro | ro – Polar radius of gyration about the shear center, (mm) | 54.4 |
| H | H – Flexural constant | 0.775 |
| tan(?) | tan(a) – Tangent of the angle between the y-y and z-z axes for single angles | |
| Qs | Qs – Reduction factor for slender unstiffened compression elements | 1 |
| Iw / 106 | Iw – Moment of inertia about the w-axis, (mm4 /10^6) | |
| zA | zA – Distance from point A to center of gravity along z-axis, | |
| zB | zB – Distance from point B to center of gravity along z-axis, | |
| zC | zC – Distance from point C to center of gravity along z-axis, | |
| wA | wA – Distance from point A to center of gravity along w-axis, | |
| wB | wB – Distance from point B to center of gravity along w-axis, | |
| wC | wC – Distance from point C to center of gravity along w-axis, | |
| SwA / 103 | SwA – Eltic section modulus about the w-axis at point A on cross section, | |
| SwB / 103 | SwB – Eltic section modulus about the w-axis at point B on cross section, | |
| SwC / 103 | SwC – Eltic section modulus about the w-axis at point C on cross section, | |
| SzA / 103 | SzA – Eltic section modulus about the z-axis at point A on cross section, | |
| SzB / 103 | SzB – Eltic section modulus about the z-axis at point B on cross section, | |
| SzC / 103 | SzC – Eltic section modulus about the z-axis at point C on cross section, | |
| rts | rts – Effective radius of gyration, (mm) | |
| ho | ho – Distance between the flange centroids, (mm) | |
| PA | PA – Shape perimeter minus one flange surface, used in Design Guide 19, (mm) | |
| PB | PB – Shape perimeter, used in Design Guide 19, (mm) | |
Albion 200-5 Air-Powered Standard Line - 2 5/8 " Dia Quart Bulk Special Deluxe Gun
200-5 Air-Powered Standard Line - 2 5/8 " Dia Quart Bulk Special Deluxe GunIndustry: Serious Sealant Applicator. Air Powered Standard. Force Generated: 1000 lbBest for extreme volume requirements, Capacity: 2 1/2 QuartMaterial Type: All Single & Slow... read more
(as of October 28, 2020 - More infoProduct prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.)
Wagner 0287040 PowerCaulk 740 Variable Speed Rechargeable Cordless Caulking Gun
(2)Cordless and rechargeableLess than 4 lbs.Up to 30 tubes in one charge6 hour recharge timeIncludes the charger and one battery
(as of October 28, 2020 - More infoProduct prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.)
Albion Quart Bulk Air Gun w/ Double Action Air Feature - 2" Diameter model #624-1
624-1 Air-Powered Isolated Cylinder Line - 2 " Dia Quart Bulk Special Deluxe GunIndustry: Serious Sealant Applicator. Air Powered Isolated Cylinder. Force Generated: 375 lbBest for extreme volume requirements, Capacity: 1 QuartMaterial Type: All Sing... read more
(as of October 28, 2020 - More infoProduct prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.)
Caulk Master PG151 Professional Air Powered Dispensing Gun
(30)The PG151 dispensing gun has a 2 in 1 handle that will dispense material from both 10.3 and 30-Ounce cartridges.Tool comes with a 3 foot air hose and standard fitting to easily connect to a high-pressure regulator and air tank or compressor (purchase... read more
(as of October 28, 2020 - More infoProduct prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.)
Ridgid 51887 / DS110 PowerPush Air-Powered Material Dispenser
(7)Returns will not be honored on this Closeout item
(as of October 28, 2020 - More infoProduct prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.)
Glass Screen Protector Designed for iPhone 11 Pro Max
(1)360-1 Air-Powered Standard Line - 1/10 Gallon Cartridge Air GunIndustry: Serious Sealant Applicator. Best for high volume or industrial applicationsMaterial Type: Material Packaged in 1/10 Gallon or 300ml Cartridges, Drive Type: Single Action AirPres... read more
(as of October 28, 2020 - More infoProduct prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.)
Albion 100-12 Air-Powered Standard Line - 1 Pint Bulk Air Gun
100-12 Air-Powered Standard Line - 1 Pint Bulk Air GunIndustry: Serious Sealant Applicator. Air Powered Standard. Pressure Generated: 120 psiBest for small tool where space is an issue, Capacity: pintMaterial Type: All Single & Slow Cure Two Componen... read more
(as of October 28, 2020 - More infoProduct prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.)
Caulk Master PG100 1/10th Gallon Cartridge Air Caulking Gun
(41)Do a 4-hour job in 45 minutesTrigger allows you to vary amount of materialOnly instant load twist lock bayonet on market3-foot air hose, 1/4-inch NPT at 70 psi maxWeighs 14.5 ounces
(as of October 28, 2020 - More infoProduct prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.)
Albion 365-2 Air-Powered Standard Line - Quart Cartridge, Unspouted w/ front cap/nozzle
365-2 Air-Powered Standard Line - Quart Cartridge, Unspouted w/ front cap/nozzleIndustry: Serious Sealant Applicator. Best for high volume or industrial applicationsMaterial Type: Material Packaged in Quart Cartridges, Drive Type: Single Action AirPr... read more
(as of October 28, 2020 - More infoProduct prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.)
![Ryobi Portable Power Inflator for Tires [NEW DIGITAL GAUGE] [18-Volt] [Cordless] [ONE+ Battery system] [P737D] (Battery Not Included, Power Tool Only) #1](https://m.media-amazon.com/images/I/41uNIoxJkNL._SL100_.jpg)
![Ryobi Portable Power Inflator for Tires [NEW DIGITAL GAUGE] [18-Volt] [Cordless] [ONE+ Battery system] [P737D] (Battery Not Included, Power Tool Only) #2](https://m.media-amazon.com/images/I/41fBcBJblcL._SL100_.jpg)
![Ryobi Portable Power Inflator for Tires [NEW DIGITAL GAUGE] [18-Volt] [Cordless] [ONE+ Battery system] [P737D] (Battery Not Included, Power Tool Only) #3](https://m.media-amazon.com/images/I/414K5jq-nUL._SL100_.jpg)
![Ryobi Portable Power Inflator for Tires [NEW DIGITAL GAUGE] [18-Volt] [Cordless] [ONE+ Battery system] [P737D] (Battery Not Included, Power Tool Only) #4](https://m.media-amazon.com/images/I/51kh6PNS8gL._SL100_.jpg)
![Ryobi Portable Power Inflator for Tires [NEW DIGITAL GAUGE] [18-Volt] [Cordless] [ONE+ Battery system] [P737D] (Battery Not Included, Power Tool Only) #5](https://m.media-amazon.com/images/I/31CXwTzG-DL._SL100_.jpg)
Ryobi Portable Power Inflator for Tires [NEW DIGITAL GAUGE] [18-Volt] [Cordless] [ONE+ Battery system] [P737D] (Battery Not Included, Power Tool Only)
(832)NEW AND IMPROVED!ONE+ COMPATIBLE! This tool runs on the power sources used in Ryobi’s ONE+ battery system, making this purchase extra smart for the Ryobi veteranPORTABLE PISTOL PUMPING POWER: Ryobi’s P737D is smaller than most inflators, boasting an ... read more
(as of October 28, 2020 - More infoProduct prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.)
CRAFTSMAN 16GA Finish Nailer with Air Compressor Combo Kit, 1 Tool (CMPFN16K & CMEC1KIT18)
(285)MAINTENANCE FREE: Oil-free motor for maintenance-free operationEASY JAM CLEARING: Tool-free jam release mechanism for easy jam clearCmec6150 compressor proudly made in the USA with global Materials in Jackson, TennesseeCmec6150 compressor with 150 ma... read more
(as of October 28, 2020 - More infoProduct prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.)
BOSTITCH Air Compressor Combo Kit, 2-Tool (BTFP2KIT)
(186)BTFP02012 6 gallon 150PSI 2.6SCFM pancake compressor with a high efficiency motorSB 1850BN 18 GA Brad nailer drives 18GA brad nails from 5/8 inches to 2 inches for a wide variety of applicationsSB 1664FN 16 GA Straight Finish nailer drives 1 1/4 to 2... read more
(as of October 28, 2020 - More infoProduct prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.)
California Air Tools 2010A Ultra Quiet and Oil-Free 1.0 HP 2.0-Gallon Aluminum Tank Air Compressor,Silver
(543)Ultra Quiet only 60 DecibelsOil-Free Pump for Less Maintenance & Costs2.0 Gallon (Rust Free) Aluminum TankPowerful 1.0 HP (Rated / Running) 2.0 HP (Peak) Motor3.10 CFM at 40 PSI 2.20 CFM at 90 PSI Ultra Quiet only 60 DecibelsOil-Free Pump for Le... read more
(as of October 28, 2020 - More infoProduct prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.)
California Air Tools CAT-4710SQ 4710Sq Quiet Compressor
(209)Material type: MetalOil-free Pump for Less Maintenance & CostsPackage dimensions:22.0"L x 11.0"W x 25.0"HPackage weight:53.0 lb
(as of October 28, 2020 - More infoProduct prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.)
DEWALT FLEXVOLT 60V MAX Air Compressor Kit, Cordless, 2.5 Gallon (DCC2560T1)
(372)Flexvolt 60V max 2.5 gallon air compressor offers all of the convenienceThis product is manufactured in United StatesThis product meets customer requirement79 dB operational noise level
(as of October 28, 2020 - More infoProduct prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.)
Makita DMP180ZX 18V LXT Lithium-Ion Cordless Inflator, Tool Only
(520)Conveniently tops off cars and light truck tires with speed and easeEasily inflates bicycle tires, sports balls, and moreMakita-built motor delivers up to 120 PSI capabilityAuto-stop function automatically stops inflation when preset air pressure is ... read more
(as of October 28, 2020 - More infoProduct prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.)
DEWALT Pancake Air Compressor, 6 Gallon, 165 PSI (DWFP55126)
(1879)165 max PSI 6.0 gallon tank (22.7 L) and 2.6 SCFM delivered at 90 PSI pump. SCFM @ 40 PSI 3.7 SCFMHigh efficiency motor for easy start up in cold weather or extension cord application. [14 ga or larger, 50 feet. (15.2 m) or less]75.5 dBA noise level ... read more
(as of October 28, 2020 - More infoProduct prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.)
California Air Tools CAT-365C 5 gallon Pressure Pot For Casting, Black
(52)5 gallon pressure PotCasting pressure PotFeatures a Teflon coated steel tankInternal dimensions: 13" Wide x 14 3/4" Deep with lid applied.Maximum pressure 80 PSIOperating pressure 60 PSI
(as of October 28, 2020 - More infoProduct prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.)
BOSTITCH Pancake Air Compressor, Oil-Free, 6 Gallon, 150 PSI (BTFP02012)
(3472)Note:Item does not includes hose or gun kit150 max PSI 6.0 gallon tank (22.7 L) and 2.6 SCFM* delivered @ 90 PSI pumpHigh efficiency motor for easy start up in cold weather ; BOSTITCH high efficiency motor for easy start up in cold weather or extensi... read more
(as of October 28, 2020 - More infoProduct prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.)